Bose CONTROLSPACE ESP-00 SERIES II WITH NEW DSP and GPIO EU (NO I/O)

Description

Eight open card slots supporting up to 64 (input and/or
output) audio channels take user-installable analog, digital,
or audio networking I/O cards to better match signal type
and channel count requirements. A full range of I/O cards
is available and can be mixed, including microphone/line
level analog audio, AES3, Dolby®/DTS® surround decoding,
and Bose ESPlink output for simplified audio to same-rack
PowerMatch® amplifiers. Dante™ and CobraNet® cards
are also available to route and distribute audio to Bose
PowerMatch amplifiers and single-rack-space DSPs as well
as other manufacturer’s compatible equipment.
Onboard connectivity includes Ethernet for control and
configuration, RS-232, and expandable general purpose I/O
with 8 control inputs and 8 control outputs. Five elegant Bose
wall-mounted user interfaces can be used to control all Bose
networkable devices.
Device and control configuration is accomplished using
Bose ControlSpace® Designer™ software, which offers an
expanding list of algorithms and improvements to deliver
a high level of functionality for most audio installations.
Installers can quickly and easily drop in the signal processing
and channel routing required, creating high-quality
customized audio systems they can then tune real-time
with ControlSpace Designer™ software. For programming
Bose user controls, a unique drag-and-drop interface and
simulator lets installers program and test end-user control
functionality offline before a single hardware device is
installed, saving onsite installation time.

Key Features

• Flexible I/O through a customizable card-frame design.
With a powerful DSP core, the ESP-00 Series II processor
accommodates up to 64 channels of audio over 8 open card
slots, and general purpose I/O (GPIO) expansion up to 16
control inputs and 16 control outputs
• High-quality open-architecture DSP supports 48 kHz
sample rate/24-bit conversion, uses a floating-point DSP and
operates at low latencies for sound system precision
• I/O expansion cards cover a number of audio channel
requirements from mic/line analog to Dante™ networking.
These cards offer different audio options to populate the 8
open card slots
• Support for popular network protocols – Allowing
integrators more flexibility in selection, the ControlSpace
ESP-00 II processor supports popular audio networking
protocols Dante™ and CobraNet® for interconnection with
other products and audio systems
• A large suite of signal processing algorithms is available.
These include automatic mic mixing, multiband graphic
and parametric EQs, Bose loudspeaker libraries, signal
generators, routers, mixers, AGC’s, duckers, gates,
compressors, source selectors and delays
• A variety of control options. The ControlSpace ESP-00 II
processor is compatible with five user control interface options
and can integrate with industry-standard control systems using
a comprehensive serial protocol through onboard RS-232 and
Ethernet ports
• ControlSpace® Designer™ software is used to configure
both the signal processing and control capabilities of
ControlSpace ESP processors. With ControlSpace Designer™
software it is possible to design, configure, control and monitor
all Bose® networked system electronics from a single software
application

Applications

Designed for a wide range of applications, including:
• Auditoriums
• Houses of worship
• Resorts and hospitality venues
• Retail stores
• Schools and universities
• Multi-purpose spaces

Technical Specifications

Integrated DSP
Signal Processor Four 32-bit floating-point digital signal processors, 200 MHz
Maximum Calculation 6.4 GIPS / 4.8 GFLOPS
Delay 288 s
Audio Latency 860 μs (analog in to analog out)
A/D and D/A Converters 24-bit
Sample Rate 48 kHz
Control Inputs
Inputs (Control) 8 analog or digital inputs, 5.1 kΩ internal pull-up resistor to 5 V, 3.81 mm Euroblock, 9-pin
Analog Input Voltage Range 0 V to 3.3 V (maximum 5 V)
Digital Input Voltage Range 0 V to 3.3 V (threshold voltage = 1.6 V)
Control Outputs
Outputs (Control) 8 digital outputs, 3.81 mm Euroblock, 9-pin
Output Voltage High: 7.5 V (open circuit), 2.5 V @ 10 mA, Low: < 1 V @ 100 mA, push-pull
Indicators and Controls
LED Status Indicators Power, Status, Ethernet/Serial (RS-232 + CC-16)
Audio Signal Indication Green (-60 to -20 dBFS), Yellow (-20 to -2 dBFS), Red (-2 to 0 dBFS)
Electrical Specifications
Mains Voltage 85 VAC-264 VAC 50/60 Hz with PFC
AC Power Consumption < 35 VA typical / < 70 VA max at < 95°F (35°C) ambient
Mains Connector IEC 60320-C14 (Inlet)
Power Dissipation 70 W (239 BTU, 60 kcal)
Physical
Dimensions 3.5″ H x 19.0″ W x 13.0″ D (88 mm H x 483 mm W x 331 mm D)
Net Weight 10.8 lb (4.9 kg)
Operating Temperature 32 °F – 104 °F (0 °C – 40 °C)
Cooling System Internal fan
General
PC Configuration Software ControlSpace® Designer™ software
Network Control Ethernet (RJ-45), 10 Mb
Communications Ports RS-232 (DB9M, DTE), Bose CC-16 (5.08 mm Euroblock 3-pin)
Expansion Slots 8 analog/digital audio, 2 GPIO (1 occupied)
Audio Channel Capacity 64 (bi-directional, digital and/or analog)