Bose POWERSHARE PS602P 230V EU

Description

Key Features

• PowerShare Technology – Patented PowerShare technology allows the total
600 watts of power to be shared asymmetrically across all outputs, as each
output is capable of delivering full power. Instead of selecting amplifier power
based on the needs of the largest zone, installers now have the freedom to use
total amplifier power in the application. This enables more flexibility during
the initial design, or later on-site when making unplanned changes that take
advantage of surplus power.
• Load-Independent Outputs – Each channel can be configured for low
impedance (4-8 Ω) or high-impedance (70/100V) applications without
bridging, use of jumpers, or software settings.
• DFL™ System – The Dual Feedback Loop system, inherited from the field
proven Bose PowerMatch® amplifier line, improves performance and reliability
through continuous monitoring and control of both the current and voltage
delivered to each output load. This combination provides improved linearity
and lower distortion, while protecting loudspeakers.
• Integrated Loudspeaker Processing with Optional PowerShare Editor
Configuration – For applications requiring additional signal processing the
PowerShare Editor Software offers real-time selection and control of Bose
loudspeaker EQs, 9-band PEQs, matrix mixing, crossover, delay, and mute/
output polarity through a USB connection. For basic setups without a PC,
rear-panel settings allow installers to recall Bose loudspeaker equalization
and protection per output channel. These features eliminate the need for an
external signal processor in many applications.
• Auto-Standby – Designed to save power consumption when not in use.
PowerShare amplifiers can be configured to automatically enter standby
mode when the audio signal falls below a set threshold, then wake when audio
returns.

Applications

Designed for a wide range of applications,
including:
• Performing arts venues
• Houses of worship
• Conference centers
• Retail stores
• Restaurants and bars
• Hospitality venues

Technical Specifications

POWER RATING
Amplifier Power 2 x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
Maximum Power per Channel 600 W @ 4-8 Ω, 70/100V
Gain (Low-Z mode) 44 dB, RCA (unbalanced) inputs; 32 dB, Euroblock (balanced) inputs
Gain (70V mode) 47 dB, RCA (unbalanced) inputs; 35 dB, Euroblock (balanced) inputs
Gain (100V mode) 50 dB, RCA (unbalanced) inputs; 38 dB, Euroblock (balanced) inputs
AUDIO PERFORMANCE
Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
Signal to Noise Ratio 100 dB (at rated power, A-weighted)
AUDIO INPUTS
Input Channels 2 unbalanced, 2 balanced
Connectors Stereo RCA, XLR/TRS
Input Impedance 10 kΩ (RCA), 20 kΩ (XLR/TRS)
Maximum Input Level 20 dBu (at 12 dBu sensitivity setting)
Sensitivity-10 / -2 dBV, RCA inputs; 4 / 12 dBu, Euroblock inputs (low / high sensitivity)
AUDIO OUTPUTS
Outputs 2
Connectors NL4 & binding posts
INTEGRATED DSP
A/D and D/A Converters 24-bit / 48 kHz
Processing Functions Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity
inversion
Loudspeaker Presets Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108
Audio Latency < 1 ms (any input to speaker output)
INDICATORS AND CONTROLS
Power LED Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
Controls, Front Panel Power On/Off, Output Level Control
Controls, Rear Panel Amplifier mode DIP switches, loudspeaker EQ dials
ELECTRICAL
Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 120 VAC: 14 W (Standby), 700 W (Max) 230 VAC: 14 W (Standby), 700 W (Max)
Mains Connector Standard IEC (C14)
Maximum Inrush Current 14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)
Protections High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
PHYSICAL
Dimensions (H x W x D) 44 mm x 483 mm x 414 mm (1.7” x 19.0” x 16.3”)
Shipping Weight 6.9 kg (15.3 lb)
Net Weight 5.5 kg (12.2 lb)
Cooling System Microprocessor controlled, variable speed fans, left to right air flow
GENERAL
Inputs (Control) USB input for configuring the amplifier with PowerShare Editor software. Mute input control.