Rode M5 Small Diaphragm Matched Pair Condenser Microphone
$369.00
- Description
Description
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and full frequency response.
A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish and is supplied with WS5 windshields and RM5 stand mounts.
In the Box
Rode M5 Compact 1/2″ Condenser Microphone (Matched Pair)
2 x Rode WS5 Windscreen for NT5 and NT6 (Gray)
2 x Rode RM5 Stand Mount for the NT5 Microphone
FAQs
How do I connect the microphone to my computer to record? –
These microphones have an XLR connection, so you will need standard 3-pin XLR cables, as well as an audio interface like the RØDE AI-1 or RØDECaster Pro, which will act as the bridge to your computer for recording. You can then use the microphone to record to a Digital Audio Workstation (DAW) like Pro Tools, Cubcase, Ableton, Logic, Garageband or Reaper to name a few, or similar audio recording software.
Specifications:
| ACOUSTIC & ELECTRICAL SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Polar Pattern Cardioid Frequency Range 20Hz ~ 20kHz Output Impedance 200Ω Equivalent Noise 19 dBA SPL (as per IEC651) Maximum Output Level +13.5 dBu Sensitivity -34 dB re 1V/Pa (20mV @ 94 dB SPL) ± 2dB @ 1kHz Dynamic Range 121 dB SPL Maximum SPL 140 dB SPL Signal to noise Ratio 75 dBA SPL (as per IEC651) Power Requirements 24V phantom power48V phantom power Output Connection 3 Pin XLRBalanced output between pin 2 (+), pin 3 (-) and pin 1 (ground) MECHANICAL SPECIFICATIONS Weight (g) 80.00g Dimensions 100.00mmH x 20.00mmW x 20.00mmD Warranty 1 year with free extension to 10 years following registration here |
